Machine-Win
1 / 2
HYDAC RFCS - N - S0 - 001000 - W - L - R23 - 1 - IW is a member of the RFCS series of refrigerated fluid chiller systems, which is an air - cooled compressor - type cooling auxiliary device. It is mainly used for precise temperature control of fluids in industrial scenarios such as machine tools and test benches. The following is a detailed overview combined with the model deduction, the general technical characteristics of the RFCS series and the data of similar models:
With a cooling capacity of 1kW (corresponding to the "001000" in the model), it can achieve a temperature control accuracy of approximately ±1.5K by referring to the RFCS - G0 series of the same family. It can stably control the fluid temperature within the set range, which is crucial for protecting precision components and ensuring process stability.
It adopts an air - cooled condenser structure, which is consistent with the "air - cooled compressor" design of the RFCS series. It does not need an additional cooling water pipeline. The air inlet and outlet are usually arranged in a front - rear layout, and is equipped with a filter grille to prevent dust from entering. The S0 size housing makes it have a small footprint and is suitable for integrated installation with equipment or auxiliary cooling scenarios.
Following the series' plug - and - play design concept, it can be put into use quickly after connection. It is equipped with basic electronic control functions, and may have fault contact and fluid level monitoring functions. Operators can obtain equipment operating status information in a timely manner.
It is inferred that it is equipped with safety components such as a high - pressure switch and an electrical float switch like the RFCS - G0 model. These components can avoid risks such as refrigerant over - pressure and insufficient fluid, and improve the safety and durability of long - term operation.
| Product Features | |
|---|---|
| Cooling capacity at 20°C/35°C tu | 1000 W |
| Housing | S0 |
| Cooling system | Compressor, air |
| Voltage (50Hz) | 230 - 0 V |
| Refrigerant | R290 |
| Flow rate | Without flow switch |
| Colour/finish | RAL 7035 Light grey |
| Model Segment | Corresponding Meaning |
|---|---|
| RFCS | Product Series, representing HYDAC's Refrigerated Fluid Chiller System, an active refrigeration type fluid cooling system. |
| N | It may represent a specific electrical configuration or control mode (the exact definition needs to be confirmed by the official manual; similar series letters usually distinguish interface or control variants). |
| S0 | Housing/Frame Size, referring to the compact S0 specification housing, which is smaller in volume and suitable for installation in narrow spaces. |
| 1000 | Cooling Capacity, corresponding to a cooling capacity of 1000W (1kW), which is consistent with the marking logic of "001500 for 1500W" and "010000 for 10000W" in the same series. |
| W | It may refer to the filter material or heat exchanger material, and it is inferred to be stainless steel mesh or a special heat - conducting material for the cooler with reference to the marking habit of W representing stainless steel mesh in HYDAC products. |
| L | It is likely to indicate the pipeline or interface specification, which is matched with the conventional low - flow fluid circuit connection in the S0 size. |
| R23 | Refrigerant Type, specifying that the refrigerant used is R23, which is suitable for low - temperature cooling scenarios and has stable refrigeration performance in industrial environments. |
| 1 | Configuration Level, which may represent the single - circuit design or the first - grade pump power specification, distinguishing different internal component matching schemes. |
| IW | Special Functional Identifier, which may be related to intelligent monitoring or interface type, such as supporting basic fault alarm feedback or standard industrial communication interface, which is consistent with the functional marking logic of the series' auxiliary devices. |
Delivery information typically includes delivery times, shipping methods, packaging, etc., which may vary depending on the seller and the location of purchase.
Technical documentation containing complete technical specifications, dimensional drawings, electrical parameters, and installation guidelines.
This chiller system features a cooling capacity of 1000 W (or 1 kW) at 20°C/35°C tu, design-coded as "001000" in the model number sequence.
No, this model uses an air-cooled compressor system. The integrated condenser utilizes surrounding air to dissipate heat, eliminating the need for cooling water piping.
It is designed for precision machinery and test applications, including fluid cooling on precision machine tools, hydraulic stations, and small scale test benches where temperature control stability is critical.
The "S0" code signifies the housing and frame dimensions. It indicates a compact housing footprint optimized for narrow spaces and integrated machinery layouts.
While specific configurations vary, systems in this category are equipped with key safety components like high-pressure switches and electric float monitoring switches to protect against pressure anomalies and fluid deficiency.
