Machine-Win
1 / 4
| Category | Parameter | Details |
|---|---|---|
| INPUT | VOLTAGE RANGE | 150 ~ 1500Vdc |
| FILTER | Pi type | |
| EXTERNAL INPUT FUSE | 4A/1500Vdc, required | |
| INRUSH CURRENT (Typ.) | Cold start 150A max. @ Vin=800Vdc | |
| OUTPUT | RATED POWER | 5Vo: 10W; 12Vo ~ 24Vo: 15W |
| RIPPLE & NOISE | 5 ~ 15Vo: 100mVp-p; 24Vo: 150mVp-p | |
| LINE REGULATION | ±1% | |
| LOAD REGULATION | ±1% (10% Load to Full Load) | |
| SETUP TIME | 1s max. @ 150 ~ 1500Vdc | |
| PROTECTION | SHORT CIRCUIT | Hiccup mode, continuous, automatic recovery |
| OVERLOAD | 110 ~ 300% rated output power; Hiccup mode, recovers automatically | |
| OVER VOLTAGE | Hiccup mode, recovers automatically after fault condition is removed | |
| DC INPUT PROTECTION | Reverse polarity (by internal Bridge Diode); Under voltage lockout (Start-up 147Vdc, Shutdown 137Vdc) | |
| ENVIRONMENT | WORKING TEMP. | -40 ~ +80°C (Refer to Derating Curve) |
| OPERATING ALTITUDE | 5000 meters | |
| OVER VOLTAGE CATEGORY | II: According to EN62109-1; altitude up to 5000 meters | |
| SAFETY & EMC | SAFETY STANDARDS | UL1741, CSA C22.2 No.107.1-16, IEC62109-1(LVD) approved |
| WITHSTAND VOLTAGE | I/P-O/P: 4KVac | |
| OTHERS | MTBF | 388Khrs (MIL-HDBK-217F at 25°C) |
| DIMENSIONS | P Type: 76.2×50.8×25mm; ST Type: 122.3×57.3×32mm; DR Type: 122.3×57.3×43.5mm | |
| CASE MATERIAL | Non-conductive black plastic (UL 94V-0 rated) |
| Model | Output Voltage | Output Current | Mounting Type |
|---|---|---|---|
| DDRH-15-05P | 5V | 2A | PCB Mount |
| DDRH-15-12P | 12V | 1.25A | PCB Mount |
| DDRH-15-15P | 15V | 1A | PCB Mount |
| DDRH-15-24P | 24V | 0.625A | PCB Mount |
| Type | Models covered | Dimensions | Weight |
|---|---|---|---|
| PCB Mount | DDRH-15-05P / 12P / 15P / 24P | 76mm × 50mm × 32mm | 80g |
